Official Whirlpool W10754448 CLUTCH – PartSelect.com (2024)

Hello Rachel, Thank you for the question. Yes, a defective clutch can cause a grinding noise and effect the agitating. Thank you for your inquiry, good luck with this repair!

Hello Pat, thank you for reaching out. The F7-E5 error code is a shifter fault error code. The most common problem related to this error code is going to be that the shifter has failed. We would recommend replacing the Clutch, part number PS10064562. The clutch shifts the mode of the cycle from agitate to spin. As your unit has a direct drive motor with no belt, then this clutch operates as the mode shifter does. We hope this information helps!

Hello Paul, thank you for your question. Error code F7E4 does mean a clutch failure. First unplug the washer and check the clutch for obstructions. Remove any obstructions. Replace the clutch if damaged. We hope this helps.

Hello Rick, thank you for your inquiry. The F7E5 error code means that your shifter actuator is not shifting the transmission into spin or agitate properly. This is not something you can just reset, the shift actuator is part of the clutch, part number PS10064562. We would recommend replacing the clutch to fix this error. We hope this solves your problem!

Hello and thank you for writing.We are glad you received the order in a timely manner. The clutch does not include the bearing and seal. The tub bearing and seal kit is part PS3503261. We hope this helps. Please contact us anytime if you require further assistance.

Hi Doug, thank you for contacting us. According to our research, the error code F3E2 indicates an issue with the washer temperature control. We would suggest resetting the washer by unplugging it from the outlet for at least 1 minute and then plugging it back in. Considering the symptoms you mentioned, the drain and noise issue might be caused by a faulty drain pump, part number PS11738156. We hope this helps, good luck with this repair!

Hi Jeff, thank you for the question. Based on our understanding of the issue, we would suggest you make sure there are no foreign objects stuck in the washer drum or seal. If that is not causing the issue, then you may need to check the gearcase, part number PS12741641, as it is the most likely cause of this issue. If the gearcase is faulty or worn out, you may need to replace it. We hope this helps!

Hi Gerardo, thank you for getting in touch. Too much clothing can create an imbalance in the washer tub that reduces spin speeds, leaving clothes wet. Remove some items and redistribute others to balance the washer drum before running another drain and spin cycle. Make sure your drain hose is not kinked and the drain pump is not clogged. If this does not help, we recommend replacing the drain pump, part number PS11738156. The washer will not spin if it cannot drain properly or if the pump filter is clogged. Good luck with your repair!

Hello Leo, thank you for writing. Yes, this could be due to a faulty Clutch, this part number PS10064562 for your model washer. You may also want to consider the Drum Shaft Assembly, part number PS11723032. Good luck with your repair!

Hello John, Thank you for the question. With the information provided, it sounds like the Washer Gear Case could be defective. The gear case drives the agitator and spins the basket in the washer. We hope this helps!